Printing modul/ Cropping

Follow

Peter Schlaufer

• February 07, 2019 09:10

It is of course known, that the printing module is still in development. Some suggestions are, that also printing ratios will be included that follow the DIN/ISO Standards i.e. A4, A3. This is the stadard we can get the printing papers.

Meanwhile I created in the cropping module the ratio myself but unfortunately I made a mistake in the calculation, how can I get rid of the wrong ratio?

Thank you for your help

0

• 

  Maryna Skylum

  • February 07, 2019 12:31

  Hi Peter,

  Thank you for your suggestion. I've forwarded it to our technical department for their consideration.

  Regarding Crop, are you referring to Luminar 3 or Aurora HDR?

  You can simply go back to this tool again and change the ratio.

  If that's not the case, please specify your request in a more detailed way.

   

  0

  Permalink
• 

  Peter Schlaufer

  • February 07, 2019 14:08

  Hi Maryna

  For cropping you have the several crop ratios (ratio betwenn the side-lenghts) i.e. 16:10; 16:9; 11:8.5 etc and at the bottom you can define custom ratios. These custom ratios are then displayed below. I then made a custom ratio to suit the ratio of the DIN/ISO standard, which is 1:√2. I did however a mistake in the calculation and now this faulty ratio is still displayed there and I wanted to get rid of it, which I am not able to. It is certainly not a major issue and I just wanted to know

  0

  Permalink
• 

  Maryna Skylum

  • February 07, 2019 14:28

  So when you go back to Crop - Enter Custom you can that ratio again, right?

  If yes, it's because the app remembers your last settings. So, each time you choose the Enter Custom option it will give the last chosen ratio.

  0

  Permalink
• 

  Peter Schlaufer

  • February 07, 2019 16:13

  Of course the app remembers the last setting and this is good and if I want another crop I can choose it. My concern is, that I cannot get the customcrop that I do not want of the list. But as I said it is definitely not an important issue.

  0

  Permalink

Please sign in to leave a comment.