Please use the following info to support users trying to complete the setup of Luminar 3...on a Dell XPS 13 model 9370 laptop containing the video chip mentioned, which supports OpenGL4.4 as follows:
I found out the fix to get Luminar 3 to complete the setup was the following:
Close Luminar 3 program, then change Display Settings on Dell XPS 13 laptop from 300% (recommended display setting) to 100% (on XPS 13 laptop containing Intel core I7-8550u chip...this chip supports OpenGL4.4...so the Luminar 3 program system requirement is covered with this graphics chip).
Reopen Luminar 3 and complete the setup within Luminar 3 (the view on the laptop screen will look much smaller).
Once the setup on Luminar 3 is completed by progressing forward via the right arrow button shown in the Luminar 3 program, you can revisit the Display Settings mode on the Dell laptop.
On the laptop go back to the 300% recommended display setting.
Voila, you can then go back to comfortably viewing Luminar 3 on your laptop.
Please sign in to leave a comment.