Using a Wacom tablet

Follow

Rene Born

• April 07, 2018 19:52

Hello, I bought a Wacom tablet and would like to know if somebody is using one with Luminar or Aurora.

Do somebody recommends a setting toward with it?

Thank you.

Rene

 

I'm using Mac.

0

• 

  David Tillett

  • April 10, 2018 01:14

  I'm using a Wacom table and it basically works for both Luminar and Aurora. The one issue I have found with Luminar is that it doesn't work properly with the precise adjustment of slider values, for some reason moving a slider in this mode keeps going even when pen movement stops. I have bug reported this.

  I am still working out what the best settings for the Express Keys are, testing out things like full screen, fit to screen, preview, show mask and things like that.

  I have tried out Astropad and it works in basic tests, a bit slow to update changes but that might be the way Astropad is setup/connected. I will look into this more in future as part of completing the setting up of a new computer.

  2

  Comment actions Permalink
• 

  John West

  • April 15, 2018 04:56

  Hi Rene,

  I use a small Pen & Touch Wacom Intuos.

  Attached is a screen shot of my settings using the shortcut keys. Hope this helps.

  John

  

  1

  Comment actions Permalink
• 

  Ron Franks

  • June 08, 2018 17:19

  I use a Wacom tablet with both Luminar and Aurora. While it mostly works with both programs, I have never been able to get the pressure pressure settings to work properly. The sensitivity effect on the screen always goes from 0% to 100% with nothing in between. I'm hoping this will be fixed some day, but it's been doing this for a long time so I'm not holding my breath.

  1

  Comment actions Permalink
• 

  Angela Andrieux

  • June 08, 2018 23:01

  Hi Ron,

  It sounds like the sensitivity settings aren't working quite right for you. Which model of Wacom are you using and what are the specs of your Mac?

  1

  Comment actions Permalink
• 

  Vincent Scarnera

  • October 15, 2018 15:59

  I'm new to Luminar, and I wanted to set my Wacom (Intuos 4). The ring is working with the size of the image. Now for a second function I wanted to set de ring to adjust the size of the brush, but it doesn't work.
  On my Apple keyboard (Swiss French) to get the Left or Right bracket you have to press "Alt+5" & "Alt+6", unfortunately, it doesn't work by key press and neither with the Wacom Ring with this input.

  Wenn pressing the "Alt" key on the Mac toggle between "Paint" & "Erase" on the screen....

  Any idea ?

   

  1

  Comment actions Permalink
• 

  Anastasia Davis

  • March 16, 2019 09:34

  Hi Blair! We are definitely planning to improve functionality with tablets, but at the moment we are focused on the performance of the app. There are some crucial issues that need to be resolved first. 

  1

  Comment actions Permalink
• 

  Blair Govan

  • March 16, 2019 17:55

  I've setup Intuos 5 for Luminar and works well for the most part. Definitely a time saver. Here are screen shots of my settings.

  1

  Comment actions Permalink
• 

  Blair Govan

  • April 28, 2019 15:08

  Hey Christopher,

  Tablet is definitely worth the investment. It takes awhile to get into the habit of utilizing its full potential. Accuracy is much better and editing without the need for a keyboard or mouse is so much nicer and a time saver. 

  1

  Comment actions Permalink
• 

  Fred Haider

  • April 08, 2018 20:57

  Does Luminar work with Astropad?

  0

  Comment actions Permalink
• 

  Tony Collins

  • April 09, 2018 12:03

  Also interested in this.

  0

  Comment actions Permalink
• 

  Julia Kot

  • April 10, 2018 16:03

  Hi guys, 

  We haven't tested our software with Astropad yet. 

  Please note that our software is for MacOS and Windows only. 

  0

  Comment actions Permalink
• 

  Fred Haider

  • April 10, 2018 23:46

  Just so you are aware Astropad is software that allows the user to have there IPAD as a Wacom table type devise. 

  0

  Comment actions Permalink
• 

  Rene Born

  • April 15, 2018 12:51

  Thank you John.

  0

  Comment actions Permalink
• 

  Ron Franks

  • June 11, 2018 16:45

  I'm running the Windows version under Windows 10 on a Wacom Mobilestudio tablet. I have at least a dozen other apps that work fine but the sensitivity settings don't work on both Luminar and Aurora, no matter what I set them to in both the programs and in the Wacom settings.

  Here's what the mask looks like when applying just a light amount of pressure. I've set the opacity to 100% and the softness to 0% to emphasize the lack of change. The pen pressure radius and opacity do not change, no matter what value I set under opacity and/or softness.

  

  0

  Comment actions Permalink
• 

  Rodney Brown

  • November 01, 2018 07:13

  Hi all,

  is there a how to guide on this?  I've just started using Aurora 2019 with a Wacom tablet and it's not a great experience - I suspect because I haven't set anything up to make the two work together.  Help??

  0

  Comment actions Permalink
• 

  Ron Franks

  • November 01, 2018 12:11

  I've been waiting on Skylum/MacPhun to fix Wacom pressure sensitivity for both Luminar and Aurora for the past 3 versions, but so far it's still not working. Unless it's fixed this will be the last time I upgrade.

  That said it should work without pressure sensitivity, which I believe is better that using a mouse. Is that the case Rodney or are you having other issues with your Wacom tablet?

  0

  Comment actions Permalink
• 

  Blair Govan

  • March 16, 2019 06:42

  Has there been any success/resolve with pressure sensitivity with Luminar and Aurora yet? If Skylum could update that would be great.

  0

  Comment actions Permalink
• 

  Blair Govan

  • March 16, 2019 11:27

  Hi Anastasia,

  Thanks for the reply. Agreed :)

  0

  Comment actions Permalink
• 

  Christopher Perez

  • April 28, 2019 11:31

  Blair, thanks for posting these settings. I'm new to Luminar (and photo editing outside of the mobile apps I've used). I'm intrigued by the idea of using a tablet to access Luminar settings vs the trackpad I currently use.

  0

  Comment actions Permalink
• 

  Angelo D'Souza

  • June 19, 2019 23:21

  I am assuming that pen pressure sensitive is still not working using Wacom tablets as I can not get it to work either. Am I correct with my assumption? The reported issue has been documented now for over a year, an update would be greatly appreciated! 

  0

  Comment actions Permalink
• 

  Helena Carter

  • June 20, 2019 08:36

  Hi Angelo,

  You're right, as for not, there's no such functionality. However, I'll pass your feedback to our developers.

  0

  Comment actions Permalink
• 

  Blair Govan

  • June 20, 2019 14:01
  • Edited

  Hey Angelo,

  Radius and Opacity both work. When you select to use brush within a filter you will see paint  and erase buttons towards top left. Directly next and too the right you will see a small . With a downwards arrow. Click on the arrow and a list of options are there. Radius/Opacity  options are at the bottom of the drop down list.

  0

  Comment actions Permalink
• 

  bian xie

  • June 24, 2019 07:03

  I'm running Luminar 3 in Windows 10 and have a XP-Pen Deco 01 Drawing  Tablet . I've been a Lightroom user for a long time and currently subscribe to the Creative Cloud photography bundle. I like using the Skylum apps to process beyond the simpler edits I can do in Lightroom, when needed. While I may switch to Skylum's photo management / organizer feature in Luminar when it appears,

  0

  Comment actions Permalink
• 

  Lorenzo Marcolla

  • November 16, 2019 10:12

  Can someone using the ring to set brush size/softness explain how they set in on Mac? Luminar's guide shows left and right brackets ([ and ]) as shortcuts but I can't insert them as keystrokes in the Wacom tablet options because...Thanks!

  0

  Comment actions Permalink
• 

  Thierry Hoornaert

  • February 09, 2020 19:59

  I started using Luminar with version 4 and I just tried my Wacom Intuos Small tablet for the first time.

  The Wacom tablet is -- and that is by default -- doing the click action when pressing the pen on the tablet.
  When being in editing mode however, I have the + magnifier pointer to zoom in, but clicking won't zoom in on the picture.

  Using a computer mouse, magnifying just works as expected.
  Apart from that and some unexpected Library activation, it seems to work fine. I didn't yet try to change functionality.

  I think it might be Windows Ink that is interfering with the Wacom pen.
  Is there nobody else having the same problem? Does someone know how to solve this issue?

  Thanks for your help.

  0

  Comment actions Permalink
• 

  Kirk Osborn

  • February 10, 2020 12:56

  Hi. Please contact us via https://skylum.com/support and we will figure something out.

  0

  Comment actions Permalink

Please sign in to leave a comment.